K’TRiQ Sanitation Plus is Sodium Hypochlorite based cleaner.
• Suitable to use in Hospitals and other areas.
• Stable product, thus reduces consumption, inventory burden and cost per usage.
• Supplied in vented packaging material to ensure safe handling / opening and securely closed the container after each application.
• Due to improve packaging, safe to storage / transport and handling.
➢ Broad spectrum bactericidal.
➢ Easy to use.
➢ Single product for multipurpose applications, especially for both infected and non-infected areas.
➢ Dilution based on the application and load level.
➢ Guidelines published from time to time for the applications can be easily followed.
Dosage varies based on the various and types of applications.
Areas where it can be easily used –
1. Infected areas (where bacteria or virus load is high)
3. Isolations wards
5. Pathology and Diagnostic laboratories
6. Dialysis wards
9. Emergency Medical Treatment areas
10. Dental set up
11. Eye care
Area Disinfection –
A. Infected Areas –
Use 10% solution. 100 ml of Sanitation plus + 900 ml clean water. (Minimum concentration of available chlorine should be 5000 ppm).
B. Non – infected Areas –
Use 0.5 to 1% solution. 5 or 10 ml of Sanitation plus and make it 1000 ml (1 liter) using clean water.
Fabric / Linen Washing –
A. Infected Area Fabric / Linen –
For washing linen, use 0.05% solution of Sanitation Plus. Soak the linen or Fabric (strictly white) for 30 minutes contact time after washing to disinfect.
B. Non – infected Area Fabric / linen –
For White linen of non – infected area to be soaked with 0.01% solution Sanitation plus for 30 minutes contact time.
C. Non – infected Area Clothes –
Only White clothes to be soaked with 0.01% solution of Sanitation plus for 10 to 30 contact time, depending on the soil load.
Note – Sanitation plus not suitable for coloured clothes and must not be used or tried. Decolouration will obviously happen.
Appearance Clear greenish pale yellow to yellow liquid free from extraneous matter.
Specific gravity (@25°C 1.10 ± 0.05
%Available Chlorine 6% Min.
pH 1% solution 11.0 – 12.0
The above data is just indication and standard production data.
These values should not be treated as final product specification.
Safe handling & Storage information
Refer Material safety data sheet for safe handling and if product become in contact with
body part or ingestion in the body.
After expiry, please refer material safety data sheet for disposal of the product.
Storage information Corrosive
Store product in cool and dry place. Do not store with Strong oxidising or reducing agents, Flammable or organic solvents, Strong acids and bases. Keep out of reach of children.
Available pack size 25 liter